Geyser Repair & Services in Angamaly, Kochi

The Geyser Overheating Issues service resolves problems related to excessive heating, which can pose safety risks and cause premature wear. This service ensures the geyser heats to the desired temperature without overheating, preserving its longevity and safety.

Common Problems:

• Water becoming too hot, beyond set temperature.
• Unusual noises or excessive steam.
• Potential damage to internal components due to overheating.

Service Includes:

• Diagnosis of the overheating problem.
• Repair or adjustment of thermostat and heating controls.
• Testing to ensure safe temperature regulation.

Excluded:

• Full thermostat replacement (available as a separate service).
• Major electrical repairs outside of overheating issues.
• Gas geysers repair and service.

The Geyser Leakage Repair service focuses on addressing water leaks from the geyser body, which can lead to performance issues and potential damage to surrounding areas. This service ensures that all leak sources are properly identified and repaired.

Common Problems:

• Water dripping from the geyser tank.
• Corrosion or wear leading to leaks.
• Increased water wastage and potential safety hazards.

Service Included:

• Diagnosis of leak sources on the geyser body.
• Repair of minor leaks and sealing of affected areas.
• Inspection of internal components for further leakage prevention.

Excluded:

• Replacement of heavily corroded tanks.
• Repair of inlet or outlet pipe leaks (covered separately).
• Gas geysers repair and service.

The Geyser Water Leakage from Outlet/Inlet service addresses leaks in the inlet or outlet pipes, which can disrupt water flow and reduce geyser efficiency. This service ensures that connections are secure and leak-free.

Common Problems:

• Water leaking from inlet or outlet pipes.
• Loose connections causing water wastage.
• Reduced water pressure due to leaks.

Service Included:

• Inspection of inlet and outlet connections.
• Tightening or replacement of damaged pipes or connectors.
• Testing to ensure leak-free operation after repair.

Excluded:

• Repairs to the geyser body or heating elements.
• Full pipe replacement beyond inlet/outlet connections.

The Geyser Water Not Flowing service addresses issues related to water flow interruptions in your geyser. This service ensures that water flows smoothly through the system, allowing the geyser to operate efficiently and provide a consistent hot water supply.

Common Problems:

• Blocked water inlet or outlet causing no water flow.
• Sediment buildup in pipes obstructing water movement.
• Malfunctioning internal valves preventing water from entering or exiting.

Service Included:

• Diagnosis of water flow blockage sources.
• Cleaning and clearing of inlet and outlet pipes.
• Adjustment or replacement of faulty internal valves.
• Testing to ensure proper water flow.

Excluded:

• Full geyser cleaning (available as a separate service).
• Repairs related to heating elements or thermostat issues.
• Gas geysers repair and service.

The Geyser Water Pressure Issues service focuses on resolving low or inconsistent water pressure in the geyser. Proper water pressure is essential for the geyser to function effectively and provide an adequate hot water supply.

Common Problems:

• Reduced water flow due to pressure fluctuations.
• Inadequate pressure causing slow water heating.
• Blockages or leaks affecting water pressure.

Service Included:

• Diagnosis of water pressure issues.
• Inspection and cleaning of pressure valves and pipes.
• Adjustment of water inlet settings to optimize pressure.
• Testing to confirm restored water pressure.

Excluded:

• Replacement of inlet pipes or pressure valves (if required).
• Repairs related to the geyser heating system.
• Gas geysers repair and service.

The Geyser Noise Issue Repair service addresses unusual sounds from the geyser, such as popping, rumbling, or hissing noises. These noises often indicate underlying issues, such as sediment buildup or internal component wear, which this service aims to resolve.

Common Problems:

• Sediment buildup causing popping or rumbling noises.
• Hissing sounds due to air trapped in the system.
• Loose components rattling inside the geyser.

Service Included:

• Inspection and diagnosis of noise sources.
• Sediment flushing to clear mineral buildup.
• Tightening or replacement of loose internal parts.
• Testing to ensure quiet and efficient operation.

Excluded:

• Full internal cleaning (available separately).
• Repair or replacement of heating elements unless related to noise.
• Gas geysers repair and service.

The Geyser Timer Repair service ensures that your geyser’s timer functions properly, allowing for scheduled heating and energy efficiency. A faulty timer can lead to unnecessary power consumption and inconvenience.

Common Problems:

• Timer not working, leading to continuous heating.
• Geyser failing to switch on or off at set times.
• Difficulty setting or adjusting timer controls.

Service Included:

• Diagnosis and repair of timer issues.
• Replacement of faulty timer components if needed.
• Testing to ensure accurate timer functionality.

Excluded:

• Repairs to unrelated electrical components.
• Replacement of the entire control panel if only the timer is faulty.
• Gas geysers repair and service.

The Geyser Thermostat Repair/Replacement service ensures that your geyser’s thermostat functions properly, regulating water temperature accurately. A faulty thermostat can lead to inconsistent heating or overheating, impacting safety and performance.

Common Problems:

• Inconsistent water temperature.
• Overheating or underheating of water.
• Geyser fails to heat due to a faulty thermostat.

Service Included:

• Inspection and diagnosis of thermostat issues.
• Repair of minor thermostat faults.
• Replacement of faulty thermostat if repair is not feasible.
• Testing to confirm accurate temperature control.

Excluded:

• Heating element repair (covered under a separate service).
• Electrical repairs unrelated to the thermostat.

The Geyser Uninstallation Service provides a safe and efficient removal of your geyser unit. Whether you’re replacing, relocating, or no longer using your geyser, our technicians will uninstall the unit carefully, ensuring no damage to your plumbing or electrical setup.

Common Problems:

• Damage to walls or fittings during uninstallation.
• Unsafe disconnection of water or electrical lines.
• Residual water leakage or power issues after removal.

Service Included:

• Disconnection of water and power connections.
• Safe removal of the geyser from its mounted position.
• Sealing of water lines if required.
• Cleanup of the work area post-uninstallation.

Excluded:

• Reinstallation of the unit (covered under separate installation service).
• Repairs to water or electrical lines unrelated to the uninstallation.
• Full cleaning or restoration of the removed geyser unit.